GT-541 - Page 62

4. Printing Directly from Applications 

GT-541 

52 

(9)  Press the Platen Button to insert the Platen, and check the gap between the Obstruction Sensor 

and the T-shirt. 
If the Platen height is appropriate, the space is around 2.0 mm. 

<Note>  
Make sure you check the space when the Platen is moving, so that the Obstruction Sensor work 
properly. While the platen stops, it is in upper position.   
If the Platen height is too high, the T-shirt, Print Head, or both of them may be damaged when 
printing. 

Obstruction Sensor 

(10) Press the Platen Button to eject the Platen. 

If the Platen height is appropriate, you can go to “4-6. Printing” to start printing. 
If not, go on to the following steps. 

(11) Loosen the Platen Fixing Lever. 
(12) Adjust the Platen height by turning the Platen Height Adjustment Lever. 

The “A” position is the highest. The Platen lowers as you turn the Platen Height Adjustment Lever to 
the right.   

(13) Tighten the Platen Fixing Lever securely. 
(14) Repeat steps (9) and (10) and check the Platen height.   

Repeat steps (11) to (14) until the Plate height becomes appropriate. 

Obstruction Sensor