Lower the presser foot lever, and press ; Follow the instructions on the LCD, and ; change thread colors as you sew. - Page 159

Brother HE 120 User's Guide

User's Guide

2014 Dodge Charger SRT Owner Manual

Easy Thread Cassette System

Included Accessories

Names of Machine Parts and Their Functions

Needle and presser foot section

Thread cassette indicator

LCD (liquid crystal display) (touch panel)

Optional Accessories

Part Name

Sewing Machine Features

Included Accessories ............................................................................................... Cover A

Useful Functions................................................................................................................59

Convenient Functions......................................................................................................154

Troubleshooting ..............................................................................................................164

Important Safety Instructions

FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY

For safe operation

Upper Threading .....................................................................................................23

Turning the Machine On/Off

Turning on the machine

LCD (liquid crystal display) operation

Press

Press the item to be set.

Winding/Installing the Bobbin

Place the bobbin on the bobbin winder shaft so

When the bobbin either stops spinning or spins

Hold the bobbin with your right hand and hold

Upper Threading

Loading the spool into the

Push the thread cassette eject lever on the left

While holding the end of the thread with your

Pull the thread under the disc at the front in

Insert the thread cassette into the thread

Pass the thread through the presser foot, and

Thread the thread cassette with the thread

Using the twin needle

Pull out about 10-15 cm (4-5 inches) of the

Replacing the Needle

Flannel, Gabardine

Hold the needle with your left hand, and then

Using the screwdriver, loosen the needle

Place a different presser foot below the holder

Removing the presser foot

Sewing Cylindrical Pieces

Useful Functions......................................................................................................59

General sewing procedure

Example:

Turn on the sewing machine.

Using the thread cutter

Adjusting the Thread Tension

Changing the upper thread

Adjusting the Stitch Width and Length

Adjusting the stitch length

For groups other than utility stitches

Stitch Settings..........................................................................................................66

Select the stitch type.

Overcasting Stitches

Pass the upper thread under the side cutter,

Basic Stitching

When sewing is finished, cut the thread.

Blind Hem Stitching

Adjust the stitch width until the needle slightly

Buttonhole Stitching

Use chalk to mark on the fabric the position

If the button does not fit in the button guide

Gently hold the end of the upper thread in

Changing the stitch width

Measure the distance between the holes in the

Pull the upper thread at the end of the

Zipper Insertion

Align the seam with the center of the zipper,

Inserting a side zipper

Select stitch

Topstitch around the zipper.

Select a stitch.

Place a pattern made of thick paper on the

Patchwork (crazy quilt)

For a seam allowance on the left side

Remove the presser foot and the presser foot

Reinforcement Stitching

Attach buttonhole foot "A".

Determine the desired length of the darning.

Pull down the buttonhole lever as far as

Eyelet Stitching

Decorative Stitching

Decorative

Attach monogramming foot "N".

Sew while making sure that the needle drops

Install the wing needle.

Drawnwork (Example 2)

Sewing the Various Built-In Decorative Patterns

Touch

Press .

Designing a Pattern (My Custom Stitch)

Specify the various stitching settings, such as

Examples of designs

Convenient Functions............................................................................................154

What to prepare

Since ball point needles (gold colored) are

Embroidery step by step

Loosen the presser foot holder screw and

Attaching the embroidery unit

Open the cover of the embroidery unit con-

Hold the removal lever on the bottom left of

Preparing the fabric

Setting the fabric in the

Gently remove the fabric from the frame

Place the embroidery sheet on the inner frame.

Attaching the embroidery frame

Removing the embroidery

LCD (liquid crystal display)

Selecting embroidery patterns

Selecting a frame pattern

Using an embroidery card

Embroidering a pattern

Appliquéing

Lower the presser foot lever, and press

Convenient Functions

Press .

Troubleshooting ....................................................................................................164

Cleaning the machine surface

My Custom Stitch ........................................................123

Embroidering

153

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Lower the presser foot lever, and press ; Follow the instructions on the LCD, and ; change thread colors as you sew. - Page 159

Brother HE 120 User's Guide

Table of Contents

Detailed Information for Brother HE 120 User's Guide

Related Documents for Brother HE 120 User's Guide