Job Spooling; Control Panel ; Quick Print Setup- Page 50

DRIVER AND SOFTWARE   

2 - 6

Job Spooling

The printer saves data that you want reprinted.
You can reprint a document without sending the data again from your PC. To reprint press and hold down 
the 

Control Panel 

button until all four LED’s are lit and then release the 

Control Panel 

button.

Quick Print Setup

You can turn the Quick Print Setup function ON or OFF. A small selection window appears on your 
computer. This will then let you make changes to the settings of the following functions:

■

Multiple Page

■

Manual Duplex

■

Toner Save Mode

■

Paper Source

■

Media Type

Sleep Time

When the printer does not receive data for a certain period of time (timeout), it enters sleep mode. Sleep 
mode acts as though the printer was turned off. The default timeout is 5 minutes. When 

Intelligent Sleep 

Mode

 is selected, it is automatically adjusted to the most suitable time-out setting depending on the 

frequency of your printer use. While the printer is in sleep mode, all the LEDs are off, but the printer can 
still receive data from the computer. Receiving a print file or document automatically wakes up the printer 
to start printing. Pressing one of the buttons will also wake up the printer. 

Status Monitor 

This reports the printer status (any errors that may happen with the printer) when printing. The default 
setting for the Status Monitor is off. If you would like to turn the status monitor on, go the 

Advanced

 tab, 

select 

Device options

 and then select 

Status monitor

.

Page Protection

‘Page Protection’ refers to a setting that reserves additional memory for the creation of full page images.
Selections are AUTO, OFF, LTR (Letter-size paper), A4 or LGL (legal-size-paper).
The page protection feature allows the printer to create the full page image to be printed in memory 
before physically moving the paper through the printer. When the image is very complicated and the 
printer has to wait to process the image before printing, use this function.

Print Date & Time

Date: Specifies the format of the date.

Time: Specifies the format of the time.

If you want to prevent other people from printing your data using the Reprint function, clear the 

Use 

Reprint

 check box in the job spooling settings.