Network factory default setting (For HL-2070N); Network factory default setting with APIPA protocol disabled (For HL-2070N); 3 - 11- Page 54

Control panel

3 - 11

3

Network factory default setting (For HL-2070N)

If you wish to reset the print server back to its default factory settings (resetting all information such as the 
password and IP address information), please follow these steps:

1

Turn off the printer.

2

Make sure that the front cover is closed and the power cord is plugged in.

3

Hold down the 

Go

 button as you turn on the power switch. Keep the 

Go

 button pressed down until the 

Toner

, 

Drum

 and 

Paper

 LEDs light up. Release the 

Go

 button. Make sure that the 

Toner

, 

Drum

 and 

Paper

 LEDs are off.

4

Press the 

Go

 button six times. Make sure that all the LEDs light up to indicate the print server has been 

reset to its default factory settings.

Network factory default setting with APIPA protocol disabled (For HL-2070N)

If you wish to reset the print server back to its factory default settings with APIPA protocol disabled, please 
follow these steps:

1

Turn off the printer.

2

Make sure that the front cover is closed and the power cord is plugged in.

3

Hold down the 

Go

 button as you turn on the power switch. Keep the 

Go

 button pressed down until the 

Toner

, 

Drum

 and 

Paper

 LEDs light up. Release the 

Go

 button. Make sure that the 

Toner

, 

Drum

 and 

Paper

 LEDs are off.

4

Press the 

Go

 button seven times. Make sure that all the LEDs light up to indicate the print server has 

been reset to its default factory settings.

Note

•

For more information of APIPA, see the Network User’s Guide or visit http://solutions.brother.com

•

You can also disable the APIPA protocol using Web browser, BRAdmin Professional or Web 
BRAdmin.