6.1.6. User-defined pattern control; 6.1.7. Set pattern type; User-defined pattern control - Page 105

CHAPTER 2 PCL - 85 

6.1.6.

User-defined pattern control  

Esc*c#Q (27)(42)(99)#(81) 

<1Bh><2Ah><63h>#<51h> 



# = 0 deletes all (temporary and permanent) user-defined patterns from the printer memory. 



# = 1 deletes all temporary user-defined patterns from the printer memory. 



# = 2 deletes the pattern whose ID number was specified most recently.  



# = 4 saves the user-defined pattern as a temporary pattern  whose ID number was specified most recently. 



# = 5 saves the user-defined pattern as a permanent pattern whose ID number was specified most recently. 

6.1.7.

Set pattern type  

Esc*v#T (27)(42)(118)#(84) 

<1Bh><2Ah><76h>#<54h> 



This command selects the fill pattern (black, white, gray scale or cross-hatch pattern) for use with 
subsequent graphics operations. 



# is in the range 0 to 4 or 130. 



# = 0 selects solid black as the fill pattern. 



# = 1 selects white as the fill pattern (all source images will be completely white). 



# = 2 selects one of eight gray scales. Specify the gray scale you require as a percentage (0-100%) with the 
Set Area Fill Identity command.





# = 3 selects the cross-hatch pattern you choose with the Set Area Fill Identity. 



# = 4 selects the user-defined pattern  



# = 130 selects one of the 64 gray scales. You can specify the gray scale you require as a percentage (0-
100%) with the Set Area Fill Identity command. This feature is unique to these HL-Series printers. 

0%

100%

1- 2%

3 - 10%

11 - 20 %

21-55%

36-55%

56-80%

81-99%

#=0

#=1

#=2

#=3

#=130

#=2

#=130