2. SPECIFICATIONS; 2.1. Explanation of each function; 2.1.1. Carbon copy mode setting- Page 382

CHAPTER 10 CARBON COPY

FUNCTION - 4 

2.

SPECIFICATIONS  

2.1.

Explanation of each function 

2.1.1.

Carbon copy mode setting

Sets the carbon copy function to ON or OFF. 
ON: Turns on the carbon copy function. 
OFF: Turns off the carbon copy function. 
AUTO: Turns on the carbon copy function when the @PJL ENTER LANGUAGE command is not 

included in the print data, and turns off when the @PJL ENTER LANGUAGE command is 
included. 

PARALLEL: Turns on the carbon copy function when the print data is received through the parallel 

interface, and turns off when it is received through other interface such as USB, Net, 
etc. 

The factory setting is OFF. 

2.1.2.

Setting of the number of copies

Sets the number of carbon copies. 
The number can be set to 1 (one) to 8 (eight). 
The factory setting is 1 (one). 

2.1.3.

Paper tray selection setting

Selects the paper tray for each copy. 



AUTO/REMAINING 

All trays can be selected when AUTO is set. 
When the one tray is selected to fix for other copy, the AUTO setting is switched to   
REMAINING, and other trays than the fixed one can be selected. 
If REMAINING is set when all trays are fixed, the Tray 1 is fixed. 



MPTRAY 

The paper tray is fixed to the MP tray. 



TRAY1 

The paper tray is fixed to the Tray 1. 



TRAY2 (Only when the Tray 2 is installed) 

The paper tray is fixed to the Tray 2. 



TRAY3 (Only when the Tray 3 is installed) (Only HL-5270DN/5280DW/5380DN Printer) 

The paper tray is fixed to the Tray 3. 

The factory setting is AUTO for all pages. 

2.1.4.

Additional macro setting

Sets the additional macro for each copy. 
The macro data of the PCL emulation which is registered in the storage device or memory can be   
used. 
The macro is registered by using the printer driver, macro registration command of the PCL 
emulation or other. 
Select OFF when any macro is not added. 
The factory setting is OFF for all pages.