3. COMMAND REFERENCE LIST; 3.1. Commands Descriptions; 3.1.1. PJL output tray & mode setting- Page 540

APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 5 

3.

COMMAND REFERENCE LIST 

This section describes the specific commands as listed below used to support the functions of the Mailbox unit. 

1)

PJL output tray & mode setting  

2)

PJL mailbox protection & bin number setting  

3)

PJL avoidance of output bin full  

4)

PCL output tray setting  

5)

PS output tray & mode setting  

6)

PS mailbox protection & bin number setting  

For the details on each command, refer to the following sections.  

3.1.

Commands Descriptions 

3.1.1.

PJL output tray & mode setting 

Format 

@PJL SET/DEFAULT OUTBIN=TrayName 

Parameter 

TrayName* 



UPPER: 

Select the printer face-down output tray. 



OPTIONALOUTPUTBIN1: 

Select the #1 bin of the Mailbox unit. 



OPTIONALOUTPUTBIN2: 

Select the #2 bin of the Mailbox unit. 



OPTIONALOUTPUTBIN3: 

Select the #3 bin of the Mailbox unit. 



OPTIONALOUTPUTBIN4: 

Select the #4 bin of the Mailbox unit. 



OPTIONALOUTPUTBIN5: 

Select the #5 bin of the Mailbox unit. 



OPTIONALOUTPUTBIN6: 

Select the #6 bin of the Mailbox unit. 



OPTIONALOUTPUTBIN7: 

Select the #7 bin of the Mailbox unit.) 



OPTIONALOUTPUTBIN8: 

Select the #8 bin of the Mailbox unit. 



OPTIONALOUTPUTBIN9: 

Select the #9 bin of the Mailbox unit. 



OPTIONALOUTPUTBIN10: 

Select the #10 bin of the Mailbox unit. 



ALLSTACKER: 

Select the stacker function. ** 



ALLSORTER: 

Select the sorter function. ** 

* = The tray names are compatible with the HP tray naming. 
** = These are unique tray names (parameters). 
Default = ALLSTACKER 

Explanation 



This command selects the specified output tray and output mode, trays defined as Mailboxes are numbered 
from the bottom of the unit upwards 



This command is ignored when there is no specified tray. 



The 

ALLSTACKER

 and 

ALLSORTER

 parameters are executed for all output trays other than the ones which 

are defined and protected as mailboxes.  (Refer to Section 3.1.2 'PJL mailbox protection & tray number 
setting'.) 



The difference between the SET and DEFAULT selection and the effective period of this setting follow the 
PJL specifications.