Web Based Management (web browser); Network default settings; Print the Printer Settings Page- Page 48

For Network Users

46

3

Web Based Management 

(web browser)

The Brother print server is equipped with a web server 
that allows you to monitor its status or change some 
of its configuration settings, using HTTP (Hyper Text 
Transfer Protocol).

Note

• The User Name is ‘

admin

’ and the default 

password is ‘

access

’. You can use a web browser 

to change this password.

• We recommend Microsoft Internet Explorer 6.0

®

(or greater) or Firefox

®

 1.0 (or greater) for 

Windows

®

 and Safari™ 1.0 for Macintosh

®

. 

Please also make sure that JavaScript and 
Cookies are always enabled in whichever browser 
you use. We recommend you upgrade to Safari™ 
1.2 or greater to enable JavaScript. To use a web 
browser, you will need to know the IP address of 
the print server.

1

Type 

http://printer_ip_address/

 into 

your browser.
 (Where 

printer_ip_address

 is the IP 

address or the print server name)

„

For example: http://192.168.1.2/
(if the printer’s IP address is 192.168.1.2.)

See Chapter 13 of the Network User's Guide.

4

Network default settings

To restore all network settings of the internal print 
server to default, follow the steps below.

1

Turn off the printer.

2

Make sure that the front cover is closed and the 
power cord is plugged in.

3

Hold down the 

Go

 button as you turn on the 

power switch. Keep the 

Go

 button pressed 

down until the 

Toner

,

 Drum

 and 

Error

 LEDs 

light up. Release the 

Go

 button. Make sure that 

all the LEDs turn off.

4

Press the 

Go

 button seven times. Make sure 

that all the LEDs light up when the print server 
has been reset to its default factory settings.

5

Print the Printer Settings 

Page

The Printer Settings Page lists all the current printer 
settings, including network settings. To print the 
printer settings page:

1

Make sure that the front cover is closed and the 
power cord is plugged in.

2

Turn on the printer and wait until the printer is 
in the Ready state.

3

Press the 

Go

 button three times within 2 

seconds. The printer will print the current 
printer settings page.