Fig. 5-22; Fig. 5-23- Page 137

CHAPTER 5 MAINTENANCE

5-25

!

Caution

When removing the Fusing Unit from the printer, be sure to keep the Fusing
Unit flat, so oil will not spill. Considerable damage can occur if oil is spilled
inside the printer.

5. 

Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit.

6. 

Install the new Fusing Unit into
the printer. Be sure to insert the
Fusing Unit completely into the
printer.

Fig. 5-22

7. 

Secure the Fusing Unit with the
two long screws.

Fig. 5-23

8. 

Install the Fuser Cleaner and the Oil Bottle into the new Fusing Unit, and
then lock the Oil Bottle Lock Levers.  Be careful not to spill oil inside the
printer.  This could damage the printer.

9. 

Close the Top Cover.

10. 

Plug the printer into the AC outlet.