Error Message; CHANGE FCR; NO OPC BELT- Page 180

CHAPTER 6 TROUBLE SHOOTING

6-2

Error Message

Remarks

CHANGE FCR

Replace the cleaning roller.

NO OPC BELT

Install the OPC belt.

NO FC ROLLER

Install the cleaning roller.

NO LFU

Install the lower tray unit.

When the Duplex Unit is
installed.

NO TR ROLLER

Install the transfer roller.

ILLEGAL TONER

Use only Brother genuine toner cartridge.

NO TRAY 1/2

The indicated paper tray was not detected. Install it, or
ensure that it is inserted correctly.

SIZE ERROR T1/2

Specify the correct paper size for the indicated tray.

SIZE ERROR DX

The duplex unit can print only in the sizes specified.  Specify
the correct paper size.

STACKER FULL

Remove the paper from the output tray.

MEDIA MISMATCH

Media mismatch between the Printer and the Printer Driver
setting.  Load XX into Tray <1/2>.

XX = Plain Paper,
Transparencies, Thick
Paper

SIZE MISMATCH

Paper mismatch between the Printer and the Printer Driver
setting.  Load Paper <size> size into Tray <1/2>

MANUAL FEED

Load paper <size> into Tray1, and then press GO.

MEDIATYPE ERROR

Specify the correct media type: XX

XX=T1, T2, or DX

XX = T1, T2 or DX

NO FUSING UNIT

A fusing unit was not detected. Please install one.

CARD ERROR

An error occurred when accessing the Flash card. Check
that the driver is formatted and not in Write Protect mode.