LABELS AND OVERHEAD TRANSPARENCIES; DAMAGE CAUSED BY THE USE OF UNSATISFACTORY LABELS OR; TRANSPARENCIES IS NOT COVERED UNDER ANY WARRANTY OR- Page 213

APPENDIX

A-8

LABELS AND OVERHEAD TRANSPARENCIES

The printer will print on most type of labels and transparencies designed for
use with a laser printer. Labels should have an adhesive that is acrylic-based
since such material is more stable at the high temperatures in the fusing unit.
Adhesives should not come in contact with any part of the printer, because the
label stock may stick to the drum or rollers and cause jams and print quality
problems. No adhesive should be exposed between the labels. Labels should
be arranged so that they cover the entire page with the only exposed spaces
being lengthwise down the sheet. Using labels with spaces may result in labels
peeling off and causing serious jam or print problems.

All labels and transparencies used in this printer must be able to withstand a
temperature of 200 degrees centigrade  (392 degrees Fahrenheit) for a period
of 0.1 seconds.

Label and transparency sheets should not exceed the paper weight
specifications described in this User’s Guide. Labels and transparencies
exceeding this specification may not feed or print properly and may cause
damage to your printer.

Labels can be fed from Tray 1 and Tray 2, and printed using the optional
Duplex Unit.  Transparencies can be fed from Tray 1 only and cannot be
printed using the Duplex Unit.

The entire responsibility for the quality and performance of labels and
transparencies lies with the customer.

DAMAGE CAUSED BY THE USE OF UNSATISFACTORY LABELS OR
TRANSPARENCIES IS NOT COVERED UNDER ANY WARRANTY OR
SERVICE AGREEMENTS.