CHAPTER 3 BEFORE WORKING WITH THE PRINTER- Page 57

CHAPTER 3 BEFORE WORKING WITH THE PRINTER

3-2

You can select the emulation mode manually by using the control panel to
access the EMULATION menu in SETUP mode.  

For more information, see

Chapter 4.

Note

When you use the automatic emulation selection, note the following:

• 

The EPSON or IBM emulation mode priority must be selected, because
the printer cannot distinguish between them.  Since the factory setting is
EPSON emulation mode, you might need to select the IBM emulation
mode by using the control panel to access the EMULATION menu in
SETUP mode.

• 

Try Automatic emulation selection with your application software or
network server.  If it does not work properly, select the emulation mode
manually by using either the printer control panel or the emulation
selection commands from your software.