Esc W 0; Esc [@; Cancel - Page 333

Brother HL-2700CN Command Reference Guide for Software Developers

Table of Contents

Technical Reference Guide
GLOSSARY
background image

 

CHAPTER 7 IBM PROPRINTER - 15 

Set enlarged character mode for a single line 

SO  

(14) 

 

<0Eh> 

 

This command turns enlarged character mode on for one line only.  The subsequent line of text is 
printed using double-width characters and with the line space setting doubled. 

 

The following commands cancel enlarged character mode set using the 

SO

 control code:  

CR

CAN

LF

FF

VT

Esc W 0

DC4

 and 

Esc [@

LPRINT CHR$(14); 'Set enlarged character mode for one line 

 

Cancel enlarged character mode 

DC4  

(20) 

 

<14h> 

 

This control code cancels the single-line enlarged character mode set with the 

SO

 control code.  

Subsequent text is printed using normal sized characters.  The previous line spacing setting is 
restored. 

 

The previous character pitch is restored. 

LPRINT CHR$(20); 'Cancel enlarged character mode set with SO 

 

Cancel 

CAN  

(24) 

 

<18h> 

This control code cancels single-line enlarged character mode set with the 

SO

 control code.  Subsequent 

text is printed using normal sized characters and the previous line spacing setting is restored. 

LPRINT CHR$(24); 'Cancel enlarged character mode set with SO 

 

Enlarged character mode 

EscWn (27)(87)n 

 

<1Bh><57h>n 

 

This command turns enlarged character mode on or off. 

 

If 

n

 is set to 1 subsequent text is printed using double-width characters.  The line spacing setting is 

doubled. 

 

If 

n

 is set to 0 subsequent text is printed using normal sized characters.  The previous line spacing and 

character pitch settings are restored. 

 

Only 

Esc W 0

 can be used to cancel enlarged character mode set using the 

Esc W 1

 instruction. 

 

Esc W 0

 cancels enlarged character mode set using the 

Esc W 1

 instruction,  the 

SO

 control code or 

the 

Esc [@

 instruction. 

LPRINT CHR$(27); CHR$(87); CHR$(1); 'Set enlarged character mode 

 

Set superscript or subscript character mode 

EscSn (27)(83)n 

 

<1Bh><53h>n 

 

This command allows you to print superscripts or subscripts. 

 

Set 

n

 to 0 to print subsequent text using superscript characters. 

 

Set 

n

 to 1 to print subsequent text using subscript characters. 

LPRINT CHR$(27); CHR$(83); CHR$(1); 'Turn on subscript mode 

 

Cancel superscript or subscript character mode 

EscT  (27)(84) 

  <1Bh><54h> 

 

This command stops superscript or subscript printing if either had been enabled. 

 

Subsequent text is printed using normal characters. 

LPRINT CHR$(27); CHR$(84); 'Turn off superscript/subscript mode 

 

Detailed Information for Brother HL-2700CN Command Reference Guide for Software Developers

Related Documents for Brother HL-2700CN Command Reference Guide for Software Developers