Figure 4-24; 4 - 15- Page 103

4 - 15

   OPTIONS

6

Put the main controller board back into the printer by sliding it into the guide rails.

Figure 4-24

7

Put the metal plate back on and secure the metal plate with the two screws.

8

Reconnect the interface cable (printer cable) to your computer. Plug the printer back in, and then 
turn on the printer power switch.

To check that you have installed the SO-DIMM properly, you can print the Print Settings listing that 
shows the current memory size. To print the Print Settings listing,see 

PRINT SETTINGS

 on page 

3-10.