Optional fonts package; Optional fonts package (BS-3000); Optional barcode fonts package (BT-1000)- Page 104

OPTIONS   

4 - 16

Optional fonts package

Optional fonts package (BS-3000)

The optional fonts package (BS-3000) is the CD-ROM you need for installing the PS3 136 compatible 
fonts.

Optional barcode fonts package (BT-1000)

The optional barcode fonts package (BT-1000) is the CD-ROM you need for installing the barcode fonts.

Selecting the optional fonts

After you have installed the optional font card, you can select optional fonts using any of the following 
methods: 

1

Through your application software

2

With a font selection command

3

With the control panel menu settings.

When you select fonts through your application software, follow the instructions specific to your software. 
See your software manual if you need assistance. When you select fonts with a font selection command, 
embed the font selection command in your program. See the 

Technical Reference Manual

. Call a 

Brother authorized service representative or Brother Customer Service for references to the 

Technical 

Reference Manual

. 

To select fonts with the control panel setting menu, follow these basic steps: 

1

Press any of the 

Menu

 buttons (

+

,

 -

,

 Set

 or 

Back

) to take the printer off line.

2

Press 

+

 or 

-

 until 

INFORMATION

 appears on the LCD display.

3

Press 

Set

 to proceed to the next menu level, and then press 

+

 or 

-

 until 

PRINT FONTS

 appears.

4

Press 

Set

 to print the list of optional fonts (Figure 4-23).

5

Find the font number on the list.

When you select the fonts through your software or with a command, note the following:

■

You do not need to be concerned about the font control panel setting. The software or command 
overrides the printer setting.

■

Be sure to install a font package that has the fonts you want. The printer automatically selects 
the font that has exactly the same or similar characteristics as those you have set through the 
software or with a command. If the installed font package does not happen to have a font of 
similar characteristics, the printer will print in an unexpected font.