Replacing the transfer roller; Figure 5-24; Figure 5-25- Page 123

5 - 18

   ROUTINE MAINTENANCE

the housing after you have installed it.

Figure 5-24

7)

Put the transfer belt cleaner cover back in, and then close the top cover.

8)

Turn the printer power switch back on.

Replacing the transfer roller

1)

Turn off the printer power switch.

2)

Open the back cover of the printer.

Figure 5-25

3)

Release the transfer roller lock levers on the right and left-hand sides, and then lift the levers to 

If you have the duplex unit installed, open the duplex back cover and the duplex inside unit first 
before you open the back cover of the printer.