Positioning the printer; Power Supply; Environment- Page 26

ABOUT THIS PRINTER   

1 - 8

Positioning the printer

Please read the following before you use the printer. 

Power Supply

Use the printer within the recommended power range.

AC power:

±10% of the rated power voltage

Frequency:

50/60 Hz (120 V or 220-240 V) 

The power cord, including extensions, should not exceed 5 meters (16½ feet). 

Do not share the same power circuit with other high-power appliances, such as an air conditioner, copier, 
shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you 
use a voltage transformer or a high-frequency noise filter. 

Use a voltage regulator if the power source is not stable.

Environment

■

Make sure that the power outlet/socket is near the printer and is easy to get to so that, if there is an 
emergency, it can be easily unplugged.

■

Use the printer only within the following ranges of temperature and humidity:

Temperature:

10 °C to 32.5 °C (50 °F to 90.5 °F)

Humidity:

20% to 80% (without condensation) 

■

Do not put the printer where the ventilation hole of the printer is blocked. Keep a gap of approximately 
100 mm (4 in.) between the ventilation hole and the wall. 

■

The printer should be used in a well-ventilated room.

■

Put the printer on a flat, horizontal surface.

■

Keep the printer clean. Do not put the printer in a dusty place.

■

Do not put the printer in direct sunlight. If you have to put it near a window, use a blind or a heavy 
curtain to protect the printer from direct sunlight.

■

Do not put the printer near devices that contain magnets or generate magnetic fields.

■

Do not subject the printer to strong physical shocks or vibrations. 

■

Do not expose the printer to open/naked flames or salty or corrosive gasses. 

■

Do not put objects on top of the printer. 

■

Do not put the printer near an air conditioner.

■

Keep the printer horizontal when you carry it.

■

Do not place anything on top of the power cord including this machine. Do not allow the power cord 
to be stepped on.