Go button; Job Cancel button; + or - button- Page 60

CONTROL PANEL   

3 - 3

Go button

You can change the panel indications from the current status (Menu, Error and Reprint settings) by 
pressing the 

Go 

button

once. For ERROR indications, the control panel only changes when the error is 

cleared.

You can pause printing with the 

Go

 button. Pressing the 

Go 

button again restarts the print job and clears 

the pause. During a pause, the printer is off-line.

Job Cancel button

You can cancel the processing or printing of data with the 

Job Cancel 

button. The display shows 

JOB 

CANCELLING

 until the job is cancelled. After cancelling the job, the printer returns to the READY state.

When the printer is not receiving data or printing, the display shows 

NO DATA!!!

 and you cannot cancel 

the job.

+ or - button

If you press the 

+

 or 

-

 button when the printer is in the on-line (Ready) state, it goes off-line and the LCD 

displays the menu.

To move through menus in the LCD

If you press the 

+

 or 

-

 button when the printer is in the on-line state, it goes off-line and the LCD displays 

the current mode.

You can go to other menus by pressing the 

+

 or 

-

 button. Pressing the 

+

 or 

-

 button allows you to move 

forward or backward through the menus and settings on the display. Press or keep pressing the button 
until you see the setting you want.

To enter numbers

You can enter numbers in two ways. You can press the 

+

 or 

-

 button to move up or down one number at 

a time, or you can hold down the 

+

 or 

-

 button to move faster. When you see the number you want, press 

the 

Set 

button. 

Set button

If you press the 

Set

 button when the printer is in the on-line (Ready) state, it goes off-line and the LCD 

goes to the menu.

Pressing the 

Set

 button allows you to choose the displayed menu or option. After changing the setting, 

an asterisk (*) appears briefly on the right-hand side of the message.

If the printer is in PAUSE mode and you do not want to print the data that is left, you can cancel the 
job by pressing the 

Job Cancel

 button. Once the job has been canceled, the printer will return to 

the READY state.