Fig. 6-23 ; Fig. 6-24 ; Fig. 6-25 - Page 173

CHAPTER 6 OPTIONS 

6-17 

5. 

Fit the 4 HD-6G/HD-EX shoulder 
screws into the 4 holes of the 
main controller board, and then 
secure the shoulder screws with 
the screws provided from the rear 
of the PCB. 

Fig. 6-23 

6. 

Connect the flat cable to the main 
controller board. 

Fig. 6-24 

7. 

Install the main controller board 
into the printer by sliding it into 
the guide rails. 

Fig. 6-25 

8. 

Secure the main controller board with the 2 screws. 

9. 

Reconnect the interface cable to the printer.  Plug the power cord into the 
AC outlet, and then turn on the printer. 

10. 

Format the HD-6G/HD-EX from the control panel.  See Chapter 4 for 
details.