Fig. 6-28 ; CHAPTER 6 OPTIONS - Page 177

CHAPTER 6 OPTIONS 

6-21 

5. 

Press the DIMM straight into the slot (press firmly). Make sure the locks on 
each side of the DIMM snap inward into place. (To remove a DIMM, the 
locks must be released.) 

6. 

Reinstall the main controller 
board into the printer by sliding it 
into the guide rails. 

Fig. 6-28 

7. 

Secure the main controller board with the two screws. 

8. 

Reconnect the printer cable from your computer. Plug the power cord into 
the AC outlet, and turn on the printer. 

9. 

To check whether the DIMM has been installed correctly, you may perform 
a Test Print “Print Configuration” that will print the current memory size.