Message ; Meaning and Action - Page 127

Brother HL-4000CN User's Guide

Table of Contents

CHAPTER 3 BASIC PRINTER OPERATION
CHAPTER 8 ROUTINE MAINTENANCE AND CONSUMABLE REPLACEMENT
background image

 

6-19 

Message 

Meaning and Action 

Replace Cyan  
Toner (C) 

The cyan toner cartridge is empty.  
Action:  
Replace the cyan toner cartridge.  
See 8.1.2 “Replacing the Toner Cartridges” 

Reinsert Cyan  
Toner (C) 

There is no cyan toner cartridge inserted in the printer or the 
cartridge is improperly set.  
Action:  
Grip the levers at each end of the cyan toner cartridge with your 
fingers, then push down firmly to rotate the levers forward to 
install the cartridge.  
See 8.1.2 “Replacing the Toner Cartridges” 

Sys data cleared 

Press Set 

All system settings stored in the NV memory were deleted.  
Action:  
Follow the procedure below to reset the NV memory.  

1  Press the <Form Feed/Set> button.  

The printer settings may be deleted when you reset the NV 
memory. Print the printer configuration list and the panel settings 
list to confirm settings.  
See 8.4.1 “Confirming Printer Configuration and Network 
Settings” 
See 5.3 “List of Menu Items” 

No Paper in  
All Tray 

There is no paper in any of the paper trays.  
Action:  
Load paper into the trays.  
See 4.2.1 “Load Paper in the Paper Tray” 

Push in  
All Tray 

One of the trays is not properly inserted.  
Action:  
Push the all paper trays completely back into the printer. 

Disk Full  
Please Press Set 

The hard disk became full during electronic sorting and data 
writing was halted.  
Action:  
Press the <Form Feed/Set> button.  
It deletes print jobs from the printer. Print with one of the 
following methods:  

•  Print fewer pages at a time.  

•  Deactivate the printer driver hard disk setting.  

See 3.6 “Changing the Configuration for Options” 

Check Paper  
in MP Tray 

Paper is not properly loaded in the multi-purpose tray or is 
different from that specified on the computer.  
Action:  
Make sure the paper is properly loaded into the multi-purpose 
tray. If the computer settings are incorrect, cancel printing.  
Check the following settings on your computer, reconfigure any 
that are incorrect, and reprint.  

•  Is the correct paper tray specified? 

•  Is the correct paper size specified? 

See 4.2.3 “Load Paper into the Multi-purpose Tray”  
See 3.5.2 “Cancel Printing at the Control Panel” 

Replace  
Transfer Roll 

The transfer roll cartridge needs to be replaced.  
Action:  
Replace the transfer roll cartridge.  
See 8.3.2 “Replacing the Transfer Roll Cartridge” 

Detailed Information for Brother HL-4000CN User's Guide

Lists of information found in Brother HL-4000CN User's Guide - Page 127

  • 8.1.
  • 8.1.
  • 8.4.
  • 5.3 “List of Menu Items” No Paper in All Tray There is no paper in any of the paper trays.
  • 4.2.
  • 3.6 “Changing the Configuration for Options” Check Paper in MP Tray Paper is not properly loaded in the multi-purpose tray or is different from that specified on the computer.
  • 4.2.
  • 3.5.
  • 8.3.
  • Print fewer pages at a time.
  • Deactivate the printer driver hard disk setting.
  • Is the correct paper tray specified?
  • Is the correct paper size specified?

FAQ (Frequently Asked Questions) for Brother HL-4000CN User's Guide - Page 127

  • • Is the correct paper tray specified?
  • • Is the correct paper size specified?

Related Documents for Brother HL-4000CN User's Guide