Safety Information ; Caution ; IMPORTANT - For Your Safety- Page 9

Brother HL-4000CN User's Guide

Table of Contents

CHAPTER 3 BASIC PRINTER OPERATION
CHAPTER 8 ROUTINE MAINTENANCE AND CONSUMABLE REPLACEMENT
background image

 
 

ix

 

Safety Information 

 

IMPORTANT - For Your Safety

 

 

To ensure safe operation the three-pin plug supplied must be inserted only into a standard 
three-pin power point socket which is properly earthed earthed through the normal 
household wiring.  
 
Extension cords should not be used with the equipment.  If it is essential that an extension 
cord has to be used, it must be a three-pin plug type and correctly wired to provided proper 
earthing.  Incorrectly wired extension cords may cause personal injury and equipment 
damage. 
 
The fact that the equipment operates satisfactorily does not imply that the power is earthed 
and that the installation is completely safe. For your safety, if in any doubt about the effective 
earthing of the power, consult a qualified electrician.  
 

Caution 

Use of controls or adjustment or performance of procedures other than those specified in this 
manual might result in hazardous radiation exposure. 

 

Disconnect device 

This printer must be installed near a power socket that is easily accessible. In case of 
emergencies, you must disconnect the power cord from the power socket to shut off the 
power completely. 
 

Caution for batteries 

Do not replace the battery.  There is a danger of explosion if the battery is incorrectly 
replaced.  Do not disassemble, recharge or dispose of in a fire. Used batteries should  be 
disposed of according to local regulations. 
 
 

Opmerking / Oplaadbare Batterij Recycle Informatie (For Netherlands Only) 

 

Bij dit product zijn batterijen geleverd.  Wanneer deze leeg zijn,  
moet u ze niet weggooien maar inleveren als Klein Chemisch Afval. 

 

 

 

 

 

 

Geräuschemission / Acoustic Noise Emission (For Germany Only) 

 

Lpa < 70 dB (A) DIN 45635-19-01-KL2 

 
 

IT power system (For Norway Only) 

 

This product is also designed for IT power system with Phase to phase voltage 230V. 

 

LAN Connection 

 

Caution: Connect this production to a LAN connection which is not subjected to 
overvoltages. 

Detailed Information for Brother HL-4000CN User's Guide

Related Documents for Brother HL-4000CN User's Guide