STEP 2- Page 46

Installing the Printer Driver

44

STEP 2

Macintosh

®

Ma

ci

nt

osh

®

Wi

rel

es

s 

Ne

two

rk

Confirm your network environment

The setup process will be different depending on your network environment.

Installation using SecureEasySetup™

.

If your wireless access point (A) supports SecureEasySetup™, you do not need to use a computer to configure the 
printer. The access point (router) and your printer can automatically negotiate using the SecureEasySetup™ procedure.
For instructions, see 

Using the SecureEasySetup™ software to configure your printer for a wireless network

on page 45.

A

Infrastructure mode

•

Installation temporarily using a network cable.

If there is an Ethernet Hub or Router in the same network as the wireless access point of your printer, you can 
temporarily connect the Hub or Router to the printer using an Ethernet cable (B), this is an easy way to configure the 
printer. You can then remotely configure the printer from a computer on the network.
For instructions, see 

Configuration in Infrastructure mode, using a network cable temporarily

on page 49.

•  

Installation using a wireless computer.

If a computer of yours has wireless capability, you will need to change the wireless settings of your computer to Ad-
hoc mode so you can directly connect and configure the printer.
For instructions, see 

Configuration in Infrastructure mode, using a network cable temporarily

on page 49.

B

Installation using the Setup Wizard from the control panel.

You can also configure the wireless settings of your printer, by using the Setup Wizard from the control panel.
For instructions, see Chapter 3 in the Network User’s Guide on the CD-ROM.