STEP 2- Page 58

Installing the Printer Driver

56

STEP 2

Macintosh

®

Ma

ci

nt

osh

®

Wi

rel

es

s

Ne

two

rk

11

Choose the printer you wish to configure, and 
click 

Next

. If the list is blank, check if the 

access point and the printer are powered on, 
and then click 

Refresh

.

Note

The default Node name is “

BRNxxxxxx

” for the 

users that temporarily connect with a network 
cable, or “

BRWxxxxxx

” for the users that connect 

without a network cable (where “

xxxxxx

” are the 

last six digits of Ethernet address).

12

The wizard will search for wireless networks 
available from your printer. Choose the access 
point you wish to associate the printer with, and 
then click 

Next

.

Note

• "SETUP" is the default SSID of the printer. Do not 

choose this SSID.

• If the list is blank, check that the access point has 

power and is broadcasting the SSID, and then see 
if the printer and the access point are within range 
for wireless communication. Then, click 

Refresh.

• If your access point is set to not broadcast the 

SSID you can manually add it by clicking the 

Add

button. Follow the on-screen instructions for 
entering the 

Name (SSID)

 and the Channel 

number.

13

If your network is not configured for 
Authentication and Encryption, the following 
screen will appear. To continue configuration, 
click 

OK

 and go to 

15

.

14

If your network is configured for Authentication 
and Encryption, the following screen will 
appear. When configuring your Brother 
wireless printer, you must ensure that it is 
configured to match the Authentication and 
Encryption settings of your existing wireless 
network. Choose the 

Authentication Method 

and 

Encryption Mode

 from the pull-downs in 

each setting box. Then enter the 

Network key

and click 

Next

.

Note

• If you want to setup more than WEP key1, click 

Advanced

.

• If you do not know the Authentication or 

Encryption settings for network, contact your 
network administrator.