Other Information; Shipment of the Printer; When shipping the Printer, the DRUM UNIT assembly and TONER CARTRIDGE must be - Page 24

22

■

Other Information

If for any reason you must ship your Printer, carefully package the Printer in the original packing 
to avoid any damage during transit. It is strongly recommended that you save and use the 
original packaging. The Printer should also be adequately insured with the carrier.

When shipping the Printer, the DRUM UNIT assembly and TONER CARTRIDGE must be 
removed from the Printer and placed in the foil bag. Failure to remove the unit and place 
it in the foil bag during shipping will cause severe damage to the Printer and may VOID 
THE WARRANTY.

1

Turn off the printer power switch, and then 
unplug the AC power cord.

2

Remove the drum unit assembly. 
Place it in the plastic bag and seal the bag 
completely.

3

Re-pack the printer.

Shipment of the Printer

Trademarks

The Brother logo is a registered trademark of Brother Industries, Ltd. 
Windows

®

 and Windows NT

®

 are registered trademarks of Microsoft Corporation in the U.S and other countries. 

Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc.
Adobe PostScript

®

 and PostScript3

TM

 are trademarks of Adobe Systems Incorporated.

E

NERGY

 S

TAR

 is a U.S. registered mark.

All other brand and product names mentioned in this User's Guide are registered 

Compilation and Publication

Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product 
descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be 
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited 
to typographical and other errors relating to the publication.
This product is designed for use in a Professional Environment.