Error message printouts; 6 - 3; MEMORY FULL- Page 114

TROUBLESHOOTING   6 - 3

Error message printouts

The printer will report problems by printing an error message as defined in the following table. Take the 
corrective actions for the error message.

Error message

Action

MEMORY FULL

■

Press the Go button to print the data left in the printer. Press the Job Cancel 
button if you want to delete the data left in the printer.

■

Reduce the print resolution or reduce the complexity of your document.

■

Expand the printer memory by adding a commercially available DIMM. See 
Installing additional memory in Chapter 4.

PRINT OVERRUN

■

Press the Go button to print the data left in the printer. Press the Job Cancel 
button if you want to delete the data left in the printer.

■

If this does not clear the error, reduce the complexity of your document or 
reduce the print resolution.

■

Expand the printer memory by adding a commercially available DIMM. See 
Installing additional memory in Chapter 4.

■

Set page protection to ON by using the supplied Windows driver or RPC 
program.

■

Change the following settings in the supplied Windows driver and try again. 
The best combination of these settings will vary depending on your document:

Graphics Mode
TrueType™ mode
Use Printer TrueType™ Fonts

RESOLUTION REDUCED 
TO ENABLE PRINTING
(The printer has printed the 
document at a reduced 
resolution)

■

Reduce the complexity of your document before you print to prevent 
automatic reduction in the resolution. 

■

Expand the printer memory by adding a commercially available DIMM. See 
Installing additional memory in Chapter 4.