Manual duplex printing from the multi-purpose tray (For HL-5050 and HL-5070N); Manual Duplex; Paper Source- Page 62

Brother HL-5030 User's Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

About this printer
background image

ABOUT THIS PRINTER   1 - 45

Manual duplex printing from the multi-purpose tray (For HL-5050 and HL-5070N)

Caution

Before putting the sheets back in the MP tray, you will have to straighten them, or you may get 
paper jams.

You should not use very thin or very thick paper. 

When you use the manual duplex function, it is possible that there may be paper jams or poor 
print quality. If there is a paper jam, see Paper jams and how to clear them in Chapter 6.

1

Choose the Manual Duplex printing mode from the Advanced tab, and from the Basic tab select 
the Paper Source to be MP Tray feed.

2

Using both hands put the paper in the MP tray with the side to be printed on first facing up. Follow 
the instructions on the computer screen. Repeat this step until you have printed all the 
even-numbered pages.

Figure 1-58

3

Remove the printed even-numbered pages from the output tray and put them in the same order 
back into the MP tray. Place the paper with the side that is going to be printed on (the blank side) 
face up. Follow the instructions on the computer screen.

Figure 1-59

4

Repeat Step 3 until you have printed all the odd-numbered pages on the other side of the paper.

Detailed Information for Brother HL-5030 User's Guide

Lists of information found in Brother HL-5030 User's Guide - Page 62

  • 6. 1 Choose the Manual Duplex printing mode from the Advanced tab, and from the Basic tab select the Paper Source to be MP Tray feed.

Related Documents for Brother HL-5030 User's Guide