Configuring DLC on Other Systems; Card Address; Hewlett-Packard Network Port- Page 101

8 - 5 DLC PRINTING

YL4US_FAX2800MFC4800-FM5.5

6

Click on Hewlett-Packard Network Port.

7

Type in your desired name for the port (this name must not be 
an existing port or DOS device, such as LPT1). 

8

The MAC addresses (Ethernet addresses) of available print 
servers will appear in the Card Address menu. Select the 
desired address (You can see the Ethernet address on the 
printer configuration page).

9

Click OK.

10

If you want to share the printer, click Share the Printer on the 
Network.

11

Click OK.

12

If necessary, select the appropriate printer options and then 
click OK.

Configuring DLC on Other Systems

To use DLC on other network systems, you will generally need 
vendor-supplied software. Typically such software will support the 
Brother print servers. Follow the vendor's instructions to install the 
DLC protocol on your system.

Once the protocol is installed, create a network port in the same way 
that you did for Windows

®

 NT in the previous sections. The MAC 

address (Ethernet address) of the print server should automatically 
appear during the configuration process.

You can find the node name and MAC address by printing 
out the printer configuration page. Refer to the Quick Setup 
Guide for information on how to print the configuration page 
on your print server.