Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode) using PCONSOLE...; Available Options; Print Queue Information- Page 78

NOVELL NETWARE PRINTING 6 - 14

YL4US_FAX2800MFC4800-FM5.5

Configuring the Brother Print Server 
(Queue Server Mode in Bindery emulation mode) 
using PCONSOLE and BRCONFIG

1

Login as 

Supervisor

 (NetWare 3.xx) or ADMIN (NetWare 

4.1x or later; be sure to specify the /b option for bindery mode).

2

Execute BRCONFIG from the Windows

®

 menu. 

3

Select the corresponding server name from the list of print 
servers. 

4

When you get the message that the print server is connected, 
type the default password 

access

 in response to the 

#

 prompt 

(the password will not echo), and then press the ENTER key in 
response to the 

Enter Username>

 prompt. 

5

When you get the 

Local>

 prompt, type:

6

SET NETWARE SERVER servername ENABLE

Where 

servername

 is the name of the file server on which the 

print queue will reside. If there is more than one file server that 
you wish to print from, repeat this command as many times as 
necessary. 

7

Type 

EXIT

 to exit the BRCONFIG remote console program and 

save the changes, then start the Novell PCONSOLE utility.

8

If you have NetWare 4.xx, change the mode to Bindery Mode by 
pressing F4 key. Select print server Information (NetWare 
3.xx) or print servers (NetWare 4.1x; ignore the warning 
message) from the Available Options menu. 

9

You will be shown a list of current print servers. Press the 
INSERT key to create a new entry, type in the NetWare print 
server name (

BRN_xxxxxx_P1

 by default, where 

xxxxxx

 is the 

last six digits of the Ethernet address) and press ENTER. 
Return to the main Available Options menu by pressing 
ESCAPE.

10

Select the Print Queue Information (NetWare 3.xx) or Print 
Queues (NetWare 4.1x) menu option to see list of configured 
print queues.