Manual duplex printing from the manual feed tray (For HL-5030 and HL-5040); Manual Duplex; Paper Source- Page 61

1 - 44   ABOUT THIS PRINTER

Manual duplex printing from the manual feed tray (For HL-5030 and HL-5040)

Caution

■

Before you put the sheets back in the manual feed tray, you will have to straighten them, or you 
may get paper jams.

■

You should not use very thin or very thick paper.

■

When you use the manual duplex function, it is possible that there may be paper jams or poor 
print quality. If there is a paper jam, see Paper jams and how to clear them in Chapter 6.

1

Choose the Manual Duplex printing mode from the Advanced tab, and from the Basic tab select 
the Paper Source to be Manual feed.

2

Using both hands put the paper in the manual feed tray with the side to be printed on first facing up. 
Follow the instructions on the computer screen. Repeat this step until you have printed all the 
even-numbered pages.

Figure 1-56

3

Remove the printed even-numbered pages from the output tray and put them in the same order 
back into the manual feed tray. Place the paper with the side that is going to be printed on (the blank 
side) face up. Follow the instructions on the computer screen.

Figure 1-57

4

Repeat Step 3 until you have printed all the odd-numbered pages on the other side of the paper.