Figure 4-4; 4 - 3- Page 90

4 - 3   OPTIONS

4

Hold the DIMM by the side edges. Line up the notches on the DIMM with the DIMM slot. (Check that 
the locks on each side of the DIMM slot are open or facing outwards.)

Figure 4-4

5

Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM 
click into place. (To remove a DIMM, you must release the locks.)

6

Put the metal plate back on and secure the metal plate with the two screws.

7

Put the side cover back on.

8

Reconnect the interface cable (printer cable) to your computer. Plug the printer back in, and then 
turn on the printer power switch.

To check that you have installed the DIMM correctly, print the printer settings by using the selection 
in the driver and check the printout to make sure it shows the additional memory. See Printer 
Settings and Print fonts in Chapter 3.