Install the Drum Unit Assembly; Setting Up Your Printer; Step 1- Page 10

8

Setting Up Your Printer

Do NOT connect the interface cable.
You will be prompted to connect the 
interface cable during the driver 
installation. 

1

Open the front cover by pressing the front 
cover release button.

2

Unpack the drum unit assembly.
Remove the protective part.

3

Rock it from side to side several times to 
distribute the toner evenly inside the 
assembly.

4

Put the drum unit assembly into the printer.

5

Close the front cover of the printer.

2

Install the Drum Unit Assembly

Front cover

Protective part

Drum unit 
assembly

Step 1

Front cover 
release button