Network default setting (For HL-5250DN); Network default setting with APIPA protocol disabled (For HL-5250DN)- Page 63

4. Control Panel

55

Network default setting (For HL-5250DN)

If you want to reset the print server back to its default settings (resetting all information such as the password 
and IP address information), follow these steps:

a

Turn off the printer.

b

Make sure that the front cover is closed and the power cord is plugged in.

c

Hold down 

Go

 as you turn on the power switch. First all the LEDs will light up, and then the 

Status

 LED 

will turn off. Release 

Go

. Make sure that all the LEDs have turned off.

d

Press 

Go

 six times. Make sure that all the LEDs light up to indicate the print server has been reset to its 

default settings.

Network default setting with APIPA protocol disabled (For HL-5250DN)

If you want to reset the print server back to its default settings with APIPA protocol disabled, follow these 
steps:

a

Turn off the printer.

b

Make sure that the front cover is closed and the power cord is plugged in.

c

Hold down 

Go

 as you turn on the power switch. First all the LEDs will light up, and then the 

Status

 LED 

will turn off. Release 

Go

. Make sure that all the LEDs have turned off.

d

Press 

Go

 seven times. Make sure that all the LEDs light up to indicate the print server has been reset to 

its default settings.

Note

• For more information on APIPA, see the Network User’s Guide.
• You can also disable the APIPA protocol using a web browser, BRAdmin Professional, BRAdmin Light or 

Web BRAdmin.