Restoring the network settings to factory default; 7 - 7- Page 47

Control panel setup

7 - 7

7

3

Press any of the 

Menu

 buttons (

+

,

 -

, 

Set

 or 

Back

) to take the printer off line.

4

Press 

+

 or 

-

 until 

INFORMATION

 appears on the LCD display.

5

Press 

Set

, and then press 

Set

 again to print the Printer Settings Page.

Restoring the network settings to factory default

If you wish to reset the print server back to its default factory settings (resetting all information such as the 
password and IP address information), please follow these steps:

(For HL-5250DN)

1

Turn off the printer.

2

Make sure that the front cover is closed and power cord is plugged in.

3

Hold down the 

Go

 button as you turn on the power switch. Keep the 

Go

 button pressed down until the 

Toner

, 

Drum

 and 

Paper

 LEDs light up. Release the 

Go

 button. Make sure that the 

Toner

, 

Drum

 and 

Paper

 LEDs are off.

4

Press the 

Go

 button six times and then release the 

Go

 button. Make sure that all the LEDs light up to 

indicate the print server has been reset to its default factory settings.

(For HL-5270DN)

1

Press the 

+

 or 

- 

button to choose 

NETWORK

. Press 

Set

.

2

Press the 

+

 or 

- 

button to choose 

FACTORY RESET

. Press 

Set

.

3

Press 

Set

 again.

Note

You can reset the print server back to its default factory settings using the BRAdmin Professional utility for 
Windows

®

, BRAdmin Light utility for Macintosh

®

 or a web browser. For more information, see 

Changing the 

print server settings

 on page 2-5 for Windows

®

 and 

Changing the print server settings

 on page 6-3 for 

Macintosh

®

.