Using the control panel to configure your printer for a network; Using other methods to configure your printer for a network; Search Active Devices- Page 22

Configuring your network printer with an Ethernet cable connection

2 - 4

2

3

Select 

Search Active Devices

 from the 

Devices

 menu. BRAdmin Professional will search for new 

devices automatically.

Note

•

If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the 
device will appear as APIPA in the BRAdmin Professional utility screen.

•

You can find the node name and Ethernet address (

Node Address

 above) by printing out the Printer 

Settings Page. See 

Printing the Printer Settings Page

 on page 8-11 for information on how to print the 

Printer Settings Page on your print server.

4

Double-click the unconfigured device.

5

Enter the 

IP address

, 

Subnet Mask

 and 

Gateway

 (if needed) of your print server.

6

Click 

OK

.

7

With the correctly programmed IP address, you will see the Brother print server in the device list.

Using the control panel to configure your printer for a network

You can configure your network printer using the control panel 

NETWORK

 menu. See 

Control panel setup

 on 

page 8-1.

Using other methods to configure your printer for a network

You can configure your network printer using other methods. See 

Other ways to set the IP address (for 

advanced users and administrators)

 on page A-1.