WIRED menu options; WIRED ENABLE; TCP/IP- Page 63

Control panel setup

8 - 5

8

1. The factory setting for IP Address may be changed by the APIPA setting.
2. The factory setting for Subnet Mask may be changed by the APIPA setting.
3. PASSPHRASE is used for the WPA-PSK authentication.
4. USER and PASSWORD are used for the LEAP authentication.

WIRED menu options

See 

WLAN menu options (HL-5280DW only)

 on page 8-8 for detailed information of the 

WLAN

 menu option.

WIRED ENABLE

You can enable and disable the wired network connection by selecting 

ON

 or 

OFF

.

TCP/IP

This menu has eight sections: 

TCP/IP ENABLE

, 

IP ADDRESS=

, 

SUBNET MASK=

, 

GATEWAY=

, 

IP BOOT 

TRIES

, 

IP METHOD

, 

APIPA

 and 

IPV6

.

■

TCP/IP ENABLE

You can enable and disable the TCP/IP protocol.

■

IP ADDRESS=

This field displays the current IP address of the printer. If you have selected a 

IP METHOD

 of 

STATIC

, 

enter the IP address that you wish to assign to the printer (check with your network administrator for the 
IP address to use). If you have selected a method other than 

STATIC

, the printer will attempt to determine 

its IP address using the DHCP or BOOTP protocols. The default IP address of your printer will probably 
be incompatible with the IP address numbering scheme of your network. We recommend that you contact 
your network administrator for an IP address for the network the unit will be connected on.

■

SUBNET MASK=

This field displays the current subnet mask used by the printer. If you are not using DHCP or BOOTP to 
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the 
subnet mask to use.

■

GATEWAY=

This field displays the current gateway or router address used by the printer. If you are not using DHCP 
or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not 
have a gateway or router, leave this field blank. Check with your network administrator if you are unsure.

■

IP BOOT TRIES

This field displays how many times the printer attempt to scan the network to obtain the IP address 
through the 

IP METHOD

 you have set (see 

IP METHOD

 on page 8-6). The default setting is 3.

NETWORK

(Continued)

FACTORY
RESET

OK?

-

-

-

Level one

Level two

Level three

Level four

Options 1

Factory settings