NETBIOS/IP; You can enable and disable the NetBIOS facility to obtain the IP address.; ENET- Page 66

Control panel setup

8 - 8

8

■

IPV6

This printer is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6 
protocol, visit http://solutions.brother.com for more information.

NETBIOS/IP

You can enable and disable the NetBIOS facility to obtain the IP address.

ENET

Ethernet link mode. 

AUTO

 allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T 

full or half duplex mode by auto negotiation.

100BASE-TX Full Duplex (

100B-FD

) or Half Duplex (

100B-HD

) and 10BASE-T Full Duplex (

10B-FD

) or Half 

Duplex (

10B-HD

) fix the print server link mode. This change is valid after the print server has been reset. The 

default setting is 

AUTO

.

Note

If you incorrectly set this value, you may not be able to communicate with your print server.

SET DEFAULT

You can restore the 

WIRED

 menu settings to factory default.

WLAN menu options (HL-5280DW only)

See 

WIRED menu options

 on page 8-5 for detailed information of the 

WIRED

 menu option.

WLAN ENABLE

You can enable and disable the wireless network connection by selecting 

ON

 or 

OFF

.

TCP/IP

See 

TCP/IP

 on page 8-5 for more information.