NETBIOS/IP; SET DEFAULT; 8 - 10- Page 68

Control panel setup

8 - 10

8

■

PASSWORD

If you have selected 

LEAP

 for an authentication mode, you will need to enter a password that is 32 

characters or less in length.

■

APPLY

In order to make your wireless settings effective, you must select the 

APPLY

 option from the 

WIRELESS

sub menu and then select 

YES

 or 

YES&REPORT

. If you do not do this, the network settings will not be used 

unless you switch the printer off and then on again.

NETBIOS/IP

You can enable and disable the NetBIOS facility to obtain the IP address.

SET DEFAULT

You can restore the 

WLAN

 menu settings to factory default.