Brother Internet Print: Using BRAdmin to Configure the Print Server; Brother Internet Print: Using BRAdmin to ; Configure the Print Server- Page 54

CONFIGURING INTERNET PRINTING FOR WINDOWS

®

 5 - 4

Brother Internet Print: Using BRAdmin to 
Configure the Print Server

The steps required to configure the print server to receive print jobs 
from a Windows

®

 95/98/Me/2000/XP and Windows NT

®

4.0 PC 

running the BIP software is as follows:

1

Start BRAdmin.

2

Select the node name of the desired Brother print server from 
the list and double click on it. (the default node name is usually 

BRN_xxxxxx

, where 

xxxxxx

 is the last six digits of the 

Ethernet address (MAC address)). You will be prompted for a 
password; the default password is 

access

.

3

Click on the POP3/SMTP tab.

4

Enter the address of the POP3 server (consult your network 
administrator if you do not know this address).

5

Enter the mailbox name for the remote Brother print server. 
Usually this will be the first part of the E-mail address (for 
example, if the E-mail address of the print server is 

emailprinter@xyz

, then the mailbox name would be 

emailprinter

).

6

Enter the password for the mailbox, if any.

Skip this section if you wish to use the print server remote 
console or Web Browser to configure the print server.

Using the BRAdmin Professional utility, you can configure 
the Brother print server using the TCP/IP protocol, or the IPX 
protocol.

You can find the node name and MAC address by printing 
out the printer settings page. Refer to the Quick Setup Guide 
for information on how to print the settings page on your print 
server.