Error Message; MEDIATYPE ERROR; MANUAL FEED- Page 170

TROUBLESHOOTING 6 - 2

HL7050_US_UG_FM5.5

MEDIATYPE ERROR

Specify the correct type of media.  

MANUAL FEED

Put the same size of paper in the multi-purpose tray as 
is shown on the LCD.  If the printer is 'paused', press 
Go.

SIZE ERROR XXX

Put the same size paper in the paper tray or multi-
purpose tray that is selected in the printer driver. See 
What kind of paper can I use? in Chapter 1.

NO TRAY ID XXX

The tray you are trying to print to has been taken out.  
Put the tray back in the printer.  

SIZE ERROR DX

Put the same size paper in the paper tray or multi-
purpose tray that is selected in the printer driver. See 
What kind of paper can I use? in Chapter 1.

SIZE ERROR MX

Put the same size paper in the paper tray or multi-
purpose tray that is selected in the printer driver. See 
What kind of paper can I use? in Chapter 1.

NO DX UNIT

Put the Duplex unit on the printer properly.  See the 
User's Guide for the Duplex unit.  

DX LEVER ERROR

Move the Duplex lever to the correct position.

NO MX UNIT

Change the job properties or install the Mailbox unit 
correctly.

DIMM ERROR

Re-install the DIMM correctly.
Turn off the printer.  Wait a few seconds, and then turn 
it on again.  If this error message appears again, 
replace the DIMM with a new one.  

CARD ERROR

Make sure of the following:

■

The CompactFlash card is installed properly. 

■

The installed CompactFlash card is formatted 
properly  

Turn off the printer.  Wait a few seconds, then turn it on 
again.  If this error message appears again, replace 
the CompactFlash card with a newone.

HDD ERROR

Make sure of the following points:

■

The cable is connected correctly.

■

The HDD is installed correctly.

■

The installed HDD is formatted correctly.

Turn off the printer.  Wait a few seconds, then turn it on 
again.  If this error message appears again, replace 
the HDD with a new one.  

CARD REMOVAL

Turn off the printer.  Wait a few seconds, then turn it on 
again.  If this error message appears again, replace 
the CompactFlash card with a new one.    

LINE ERROR

Check the serial interface settings (baud rate, code 
type, parity and handshake protocols).

BUFFER ERROR

Check the Interface settings.

STORAGE FULL

Delete unnecessary macros or fonts, or replace the 
CompactFlash card or HDD with a new one.  

Error Message

Action