Windows® NT 4.0 Printer Setup; Add Printer; My Computer- Page 103

8 - 4 DLC PRINTING

YL4US_FAX2800MFC4800-FM5.5

Windows

®

 NT 4.0 Printer Setup

Log into Windows

®

 NT with administrative privileges. From the Start 

menu, select Settings and then Printers.

1

Select Add Printer (If you have already installed a Brother printer 
driver, double click the printer driver that you wish to configure and 
then select Printers/Properties, select the Ports tab and 
continue from Step 4 (ignoring steps 9-11 about installing the 
correct driver)).

2

Select My Computer and then click Next.

3

Select Add a Port.

4

Select Hewlett-Packard Network Port and then click New 
Port.

5

A list of available print server MAC addresses (Ethernet 
addresses) appears in the larger box under Card Address. 
Select the address of the desired print server (you can see the 
Ethernet address on the printer configuration page).

6

The selected print server address will then appear in the smaller 
box under Card Address.

7

Type in any desired name for the port (the name must not be the 
name of an existing port or DOS device, such as LPT1) and click 
OK then on the Printer Ports screen, click Close.

8

The name you selected in the above step will appear as a 
checked port in the list of available ports. Click Next.

9

Select the correct driver. Click Next.

10

Give a name to the printer. If desired, select the printer as the default.

11

Select Shared or Not Shared. If shared, specify the share 

You can find the node name and MAC address by printing out the 
printer configuration page. Refer to the Quick Setup Guide for 
information on how to print the configuration page on your print 
server.