12 - 10 TCP/IP CONFIGURATION- Page 133

12 - 10 TCP/IP CONFIGURATION

YL4US_FAX2800MFC4800-FM5.5

On VMS systems, the connection is made as shown in the following 
example:

$ MCR NCP
NCP>CONNECT VIA QNA-0 PHY ADD 00-80-77-31-01-07

On ULTRIX systems, you would execute commands similar to the 
following example:

# addnode BR -c qna-0 -h 00-80-77-31-01-07
# ccr BR

On a NetWare networks, you can use the BRCONFIG utility which 
are included with every print server.

If you are using the remote console, you will get the message 

Console connected

 (VMS) or 

Connection established

(BRCONFIG) or 

Remote console reserved

 (ULTRIX). Press 

RETURN and enter the default password 

access

 in response to the 

"#" prompt (it will not echo).

You will be prompted for a user name. Enter anything in response to 
this prompt.

You will then get the 

Local>

 prompt. Type 

SET IP ADDRESS

ipaddress

, where 

ipaddress

 is the desired IP address you wish 

to assign to the print server (check with your network manager for the 
IP address to use). For example:

Local> SET IP ADDRESS 192.189.207.3

You will now need to set the subnet mask by typing 

SET IP SUBNET 

subnet mask

, where 

subnet mask

 is the desired subnet mask 

you wish to assign to the print server (check with your network 
manager for the subnet mask to use). For example:

Local> SET IP SUBNET 255.255.255.0