PATHWORKS for DOS Configuration; Print Manager; Printer Setup- Page 110

LAT NETWORK CONFIGURATION 9 - 5

YL4US_FAX2800MFC4800-FM5.5

PATHWORKS for DOS Configuration

To configure the print server for PATHWORKS for DOS:

1

Create a VMS queue as previously described.

2

Run PCSA_MANAGER on the VMS system.

a

Type 

MENU

 to get the PCSA menu.

b

Select SERVICE OPTIONS

c

Select ADD SERVICE (do not use the ADD PRINTER 
QUEUE option as this will add a PCL printer reset that will 
affect PostScript printing.

d

Select PRINTER SERVICE.

e

Enter service name (pick a name).

f

Enter VMS queue name (previously defined).

g

Enter VMS form name (use the default if you do not have a 
specific form defined).

3

Perform the following steps on the PC:

a

If you are using DOS, type the command 

USE 

LPTx:\\node\service

 at the DOS prompt, where 

x

 is the 

PC parallel port number, 

node

 is the DECnet node name and 

service

 is the service name picked previously. For 

example:

USE LPT1:\\VAX\LASER

You may delete this print service by typing 

LATCP

 at the 

C:>

 prompt 

and then entering the command 

DELETE LPT1: 

b

If you are using Windows

®

 3.1x, make sure that you have 

selected DEC PATHWORKS as the network under the 
Windows

®

 Setup icon. 

c

Then click on the Print Manager icon, select Options and 
then Printer Setup.