Configuring Netware 3 and NetWare 4 systems; Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode) using BRAdmin; Configuring the Brother Print Server - Page 72

NOVELL NETWARE PRINTING 6 - 6

YL4US_FAX2800MFC4800-FM5.5

Configuring Netware 3 and NetWare 4 systems

Brother's BRAdmin application provides similar functionality to the 
NetWare PCONSOLE utility (or the NWADMIN utility in NetWare 
4.1x or later). To use the BRAdmin application to configure a Brother 
print server under NetWare, make sure that you are logged in as 
SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x or 
later) and perform the appropriate steps as detailed in the following 
pages.

Configuring the Brother Print Server 
(Queue Server Mode in Bindery emulation mode) 
using BRAdmin

1

Make sure that you logged in as SUPERVISOR (NetWare 2.xx 
or 3.xx) or ADMIN (NetWare 4.xx or later).

2

Start BRAdmin.

3

One or more print servers will appear in the list (the default node 
names are 

BRN_xxxxxx

, where 

xxxxxx

 is the last six digits of 

the Ethernet address (MAC address)). 

4

Select the print server that you wish to configure and double 
click it. You will be asked for a password. The default password 
is  

access

.

5

Select the NetWare tab. 

You must install the Novell NetWare Client 32 if you wish to 
create queue information on your NetWare servers by 
BRAdmin.

You can find the node name and MAC address by printing 
out the printer configuration page. Refer to the Quick Setup 
Guide for information on how to printer the configuration 
page on your print server.