List of factory settings; Display Shows- Page 122

CONTROL PANEL 3 - 38

HL7050_US_UG_FM5.5

List of factory settings

The following table shows the factory settings. 

■

The emulation mode affects the setting.  Effective modes 
are shown in brackets in the following table. 

■

The following settings cannot be restored to the factory 
settings with the reset menu in the factory settings mode - 
interface mode, HRC setting, page protection, scalable 
font, lock panel, page counter and local language for 
display messages.

■

The copy setting is always restored to the factory setting 
when the printer is turned off and on again. 

■

It is not possible to reset the network settings using the 
control panel. If you want to reset the print server to its 
factory settings (resetting all information such as the 
password and IP address information), hold down the 
Network Test button on the Network board (NC-4100h) for 
more than 5 seconds.

Display Shows

Submenu

Factory setting

PAPER

SOURCE

=AUTO

PRIORITY

=MP>T1>T2>T3>T4

MP FIRST

=OFF

MP SIZE

=ANY/A4/LETTER

MANUAL FEED

=OFF

DUPLEX

=OFF

OUTPUT

=STANDARD

QUALITY

RESOLUTION

=600

HRC

=MEDIUM

TONER SAVE

=OFF

DENSITY

0

SETUP

LANGUAGE

=ENGLISH

PANEL CONTROL

LOWER LCD=NONE
LCD DENSITY=1
AUTO ONLINE=ON
BUTTON REPEAT=0.1 SEC
MESSAGE SCROLL=LEVEL 1

POWER SAVE TIME

=30MIN