Tape Cutting; LABEL PRINTING- Page 62

LABEL PRINTING

58

Tape Cutting Options

z

Tape Cutting

z

Setting

Description

Example

Large 

Margin

Automatically cuts the tape after each label is
printed, leaving a margin of 24 mm on each 
end.

Small 

Margin

Automatically cuts a piece of blank tape 
before printing the first label and then cuts the 
tape after each label is printed, leaving a 4 
mm margin at each end of each label.

Chain

• Automatically cuts a piece of blank tape 

before printing the first label and then cuts 
the tape after each label is printed, leaving 
a 4 mm margin at each end of each label.

• Once the last label is printed, the tape is not 

fed and cut.

No Cut

• Prints a strip of labels with no cuts in 

between.

• Pressing the 

Preview

 while holding down 

Shift

 key will feed and cut the last label 

printed.

Special 

Tape

• Select this setting when using special tape.
• When using Fabric Iron-On Tapes or Extra 

Strength Adhesive Tapes, set "On" for 
Manual Cutting before printing. After 
printing, remove the tape cassette from the 
machine and use scissors to cut the tape.

ABC

ABC

24 mm 24 mm

ABC

ABC

4 mm

4 mm

23 mm

ABC

ABC

4 mm

4 mm

23 mm

ABC ABC

24 mm

8 mm

ABC ABC

24 mm

• When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, refer to the above 

"Special Tape".

• The tape is not cut after the last label is printed when “Chain” or “No Cut” is set. Hold down 

the 

Shift

 key and press the 

Preview

 key to feed and cut tape automatically, or cut the tape 

manually if you are using Fabric Iron-on Tapes or Extra Strength Adhesive Tapes.