TROUBLESHOOTING AND ROUTINE MAINTENANCE
11 - 2
Document Jam
(MFC-420CN
only)
The document scanned from ADF
was longer than about 35.4
inches.
Using the automatic document feeder
(ADF) (Not available for MFC-210C)
The document is jammed in the
MFC.
Document jams (MFC-420CN only)
DR Mode in
Use
The MFC is set to Distinctive Ring
mode. You can not change the
Receive Mode from Manual to
another mode.
Set Distinctive Ring to Off.
(See
Turning off the Distinctive Ring
A-4.)
High
Temperature
The print head is too warm.
Allow the MFC to cool down.
Ink Empty
One or more of the ink cartridges
is empty. The MFC will stop all
print operations. While memory is
available, black and white faxes
will be received into memory. If a
sending machine has a color fax,
the MFCās āhandshakeā will
request that the fax be sent as
black and white. If the sending
machine has the ability to convert
it, the color fax will be received into
memory as a black and white fax.
Replace the ink cartridges.
(See
Low
Temperature
The print head is too cold.
Allow the MFC to warm up.
Media Error
The media card is either
corrupted, improperly formatted,
or there is a problem with the
media card.
Re-insert the card firmly into the slot to make
sure it is in the correct position. If the error
remains, check the media drive by inserting
another media card that you know is working.
Near Empty
One or more of the ink cartridges
are running out of ink. If a sending
machine has a color fax, the
MFCās āhandshakeā will request
that the fax be sent as black and
white. If the sending machine has
the ability to convert it, the color
fax will be received into memory
as a black and white fax.
Order a new ink cartridge.
(See
Ordering accessories and supplies
page ii.)
No Cartridge
An ink cartridge is not properly
installed.
Take out the ink cartridge and put it in again
seating it properly.
(See
No File
The media card in the media drive
does not contain a .JPG file.
Reinsert the correct media card.
ERROR MESSAGES
ERROR
MESSAGE
CAUSE
ACTION