Subnet Mask- Page 28

FRONT PANEL SETUP 3 - 5

NC9100h_FM6.0

IP Address

This field displays the current IP address of the machine. If you have 
selected a BOOT Method of Static, enter the IP address that you 
wish to assign to the machine (check with your network manager for 
the IP address to use).  If you have selected a method other than 
Static, the machine will attempt to determine its IP address using the 
DHCP or BOOTP protocols. The default IP address of your machine 
will probably be incompatible with the IP address numbering scheme 
of your network. We recommend that you contact your network 
manager for an IP address for the network the unit will be connected 
on.

1

Press 

Menu/Set

, 

5

, 

1

, 

2

.

2

Select 

1

 to change. Enter the IP address.

3

Press 

Menu/Set

.

4

Press 

Stop/Exit

.

Subnet Mask

This field displays the current subnet mask used by the machine. If 
you are not using DHCP or BOOTP  to obtain the subnet mask, enter 
the desired subnet mask. Check with your network manager for the 
subnet mask to use.

1

Press 

Menu/Set

, 

5

, 

1

, 

3

.

2

Select 

1

 to change. Enter the Subnet Mask address.

3

Press 

Menu/Set

.

4

Press 

Stop/Exit

.

When the Boot Method is set to “Auto”, the machine cannot 
receive IP address from a BOOTP server in Windows

®

 2000. 

So please ensure that you use DHCP for Windows

®

 2000 

server.