Reloading firmware using BRAdmin Professional utility; Reloading firmware using BRAdmin Professional - Page 95

A - 4 APPENDIX

NC9100h_FM6.0

Reloading firmware using BRAdmin Professional 
utility

The BRAdmin Professional utility can be used to easily re-program 
your Brother Print/Fax server.

1

Start BRAdmin Professional utility.

2

Highlight the appropriate Print/Fax server. Then press select the 
Control menu and choose Load Firmware. You can select more 
than one Print/Fax server by pressing CTRL+<select> or 
SHIFT+<select> on each additional Print/Fax server.

There are three possible ways of sending the new software 
version to the print server. For whichever method you select, 
you must enter a password for the print server. The default 
password for the Print/Fax server is 

access

.

3

TFTP PUT from this host

Use this method if you have TCP/IP already installed on your 
PC. BRAdmin Professional utility will use the TFTP protocol to 
send the new firmware data to the Print/Fax server.

AFTER SENDING FIRMWARE TO THE MACHINE, DO 
NOT TURN OFF THE MACHINE UNTIL AFTER THE 
MACHINE HAS PERFORMED AN AUTOMATIC RESTART.