Using BRAdmin Professional utility and the TCP/ IP Protocol to set the IP address; Search Active Devices; Using BRAdmin Professional utility and the TCP/- Page 20

TCP/IP CONFIGURATION 2 - 3

NC9100h_FM6.0

Using BRAdmin Professional utility and the TCP/
IP Protocol to set the IP address

If your PC is using the TCP/IP protocol, do the following:

1

Select TCP/IP filter in the left frame of the main BRAdmin 
window.

2

Select the Device menu and choose the Search Active 
Devices.

3

Select the Devices menu and choose Setup Unconfigured 
Devices.

4

Select the MAC address of your Print/Fax server and click the 
Configure button.

You can find the node name and MAC address by printing out the 
machine configuration page. Refer to this Guide chapter 3 for 
information on how to print the configuration page on your Print/Fax 
server.

5

Enter the IP address, Subnet mask and Gateway (if needed) 
of your Print/Fax server.

6

Click OK then select Close.

7

With the correctly programmed IP address, you will see the 
Brother Print/Fax server in the device list.

If the Print/Fax server is set to its factory default settings, it 
will not appear in the BRAdmin Professional utility screen. 
However, selecting the Search Active Devices option will 
force the BRAdmin Professional utility to find the device as 
an unconfigured device.